|
1,241 Products found for bitumen
|
|
Surface Dressing
An application of binder on the road surface by a bitumen distributor followed by a covering of aggregates/chippings spread by a hopper gritter. Can be a single or double layer surface dressing
Emulsion : RS-3K Cut Back : MC -3000
Prime Coating
An application of binder on a granular base to prepare for an asphalt surfacing .Normally a slow setting emulsion or cutback is used for better penetration purposes to seal off the road base. The rate of application can vary from 0.4-1.4 liter/m2
Emulsion: SS-IK Cut back : MC-30 MC -70
Tags: Bitumen supplier  bitumen exporters  bitumen waterproofing
Found in Bitumen Product Directory
|
|
|
|
Penetration Grade Bitumen is commonly used in road surfacing, and some industrial applications. Additional processing yields other grades of bitumen products and their application.
Penetration Test determines the hardness of Bitumen by measuring the depth ( in tenths of a mm) to which a standard, and loaded needle will vertically penetrate in 5 seconds, a sample of Bitumen maintained at a temperature of 25 deg C ( 77deg F). Hence the softer the bitumen, the greater will be its number of penetration units. (80/100, 60/70, 40/50)
Tags: bitumen 60/70  bitumen 40/50  bitumen rc 250
Found in Bitumen Product Directory
|
|
|
|
Prime Coat- It is typically have been spray applications of low viscosity asphalt on granular base in preparation for placing an asphalt mixture. A prime coat performs several important functions: • Coats and bonds loose mineral particles on the surface of the base • Hardens or toughens the surface of the base • Waterproofs the surface of the base by plugging capillary or interconnected voids • Provides adhesion or bond between the base and the asphalt mixture
In order for the prime coat to satisfy these functions, some asphalt must penetrate into the base. Prime coats generally are being used less frequently, particularly when the total asphalt thickness is 100 mm (4 in.) or greater. With increased asphalt thickness, there is less possibility of surface water penetration into and pavement slippage on the base. A prime coat should be considered, however, when a granular base is to be carried through an extended period, such as the winter months, or when to be exposed to abrasion damage by traffic. Even though some engineers question the benefits of priming, it should be considered when any doubts exist about the results if it were eliminated.
Tags: cut back bitumen MC 30  oxidised blown bitumen  medium curing bitumen
Found in Bitumen Product Directory
|
|
|
|
Cutback Bitumen ( Liquid Bitumen ) is Bitumen that is dissolved in a solvent . Typical solvents include Naptha, gasoline and kerosene, white spirit etc. The type of solvent controls the curing time while the amount determines the viscosity of the Cutback Bitumen.
The advantage Cutbacks have over Emulsions is a much higher residual Bitumen percent, typically over 80% compares with over 40-65% for Bitumen emulsions. The result is more Bitumen left on the roadway after curing, for the same volume of binder applied.
Tags: bitumen 80/100  bitumen 60/70  bitumen RC 250
Found in Bitumen Product Directory
|
|
|
|
This Division handles all Petroleum based products, refined from Hydro-carbon cracking with special attention to Bitumen. We export Penetraion Grade Bitumen and Viscosity Grade Bitumen including bitumen 40/50 ,bitumen 60/70, bitumen 80/100 bitumen 85/100 from different refineries. We enjoy strong relationships with many refineries throughout the Asia and able to offer a range of supply solutions.
We manufacture Cut-back Bitumen like Medium Curing Bitumen MC30, MC70, MC250.MC 800, MC3000, Rapid Curing Bitumen RC70,RC250, RC 800, Oxidized Bitumen ( Blown Bitumen) of various grades including R115/15 & to the specification of the customer and Emulsions- Prime Coat , Tack Coat , Rapid and Slow Setting for various applications.
Tags: bitumen  asphalt  bitumen supplier
Found in Bitumen Product Directory
|
|
|
|
This Division handles all Petroleum based products, refined from Hydro-carbon cracking with special attention to Bitumen. We export Penetraion Grade Bitumen and Viscosity Grade Bitumen including bitumen 40/50 ,bitumen 60/70, bitumen 80/100 bitumen 85/100 from different refineries. We enjoy strong relationships with many refineries throughout the Asia and able to offer a range of supply solutions.
We manufacture Cut-back Bitumen like Medium Curing Bitumen MC30, MC70, MC250.MC 800, MC3000, Rapid Curing Bitumen RC70,RC250, RC 800, Oxidized Bitumen ( Blown Bitumen) of various grades including R115/15 & to the specification of the customer and Emulsions- Prime Coat , Tack Coat , Rapid and Slow Setting for various applications.
Tags: bitumen  asphalt  tar
Found in Bitumen Product Directory
|
|
|
|
This Division handles all Petroleum based products, refined from Hydro-carbon cracking with special attention to Bitumen. We export Penetraion Grade Bitumen and Viscosity Grade Bitumen including bitumen 40/50 ,bitumen 60/70, bitumen 80/100 bitumen 85/100 from different refineries. We enjoy strong relationships with many refineries throughout the Asia and able to offer a range of supply solutions.
We manufacture Cut-back Bitumen like Medium Curing Bitumen MC30, MC70, MC250.MC 800, MC3000, Rapid Curing Bitumen RC70,RC250, RC 800, Oxidized Bitumen ( Blown Bitumen) of various grades including R115/15 & to the specification of the customer and Emulsions- Prime Coat , Tack Coat , Rapid and Slow Setting for various applications.
Tags: bitumen  asphalt  bitumen supplier
Found in Bitumen Product Directory
|
|
|
You might be also interested In:
|
|
|
|
|
|
|
|
|
|
Receive Product Alerts for bitumen
|
|
Subscribe and receive latest product updates from our sellers regularly
|
|
|
|
|
ADVERTISEMENT
ADVERTISEMENT
|
|