SLAB TILTING MACHINE / THICK PLATE TURN OVER DEVICE / THIN PLATE TURN OVER DEVICE along with other
subsidiary units such as slab-handling system, electrical and hydraulic equipment and automation
system as well as ancillary equipment such as fine dust filtering system, chips conveyor systems,
industrial cooling systems and fire-extinguishing units is used to turn or tilt the slab.

Working process of slab tilting machine:

The cross transfer system takes the slab from the loading station to the slab weighing device and
then to the grinding table.

After grinding of the slab the slab is inspected. A cross transfer system takes the slabs to a joint
slab tilting device. The slab is then tilted around its lengthwise axis for inspection. This process
is again repeated for the side of the slab which still has to be inspected.

On completion of inspection of the slab it is again weighed and placed on the loading and unloading
station. And then it is removed by the overhead crane.

Before Installation:
1 Carrying out an analysis of the local conditions with respect to installation of the slab tilter;
performing all the necessary measurement and installation.
2 Preparing and providing the user with technical projects both of the slab tilter itself and all
installations necessary for its operation: hydraulic, electrical, etc. as well as the auxiliary
equipment (transport roller tables, cranes);
3 Installation of the foundations and structures as well as power, electrical