The slag skimmer is used to rake the slag layer from the surface of molten metal. It can be used on
iron and steel ladles, aluminum holding furnaces and in other hot metal areas. This reduces the
metallurgical load. It is a hydraulically operated machine of sturdy construction for use in steel
plants. The linkages are designed to facilitate digging into the crust of hot metal and skim the
slag out of the ladle.
The design incorporates horizontal rake movement and a large bearing base for slew movement.

The following motions are possible:
Forward and reverse movement of the raking arm:
Rotation or slew of the rake arm to the left and right of center and extended travel to the right to
a parked position:
Vertical movements of the rake arm:
There are various type of mounting arrangements depending on the customer's Hot Metal Shop layout
and the area available for skimming.



Technical Specification
Features Values
Skimming Distance 5000 to 10000 mm
Total Stroke 500 to 1200 mm
Skimming Force 1200 Kg (max.)
Tilting Angle from Horizontal Position 6 Degrees on both sides
Swivelling Angle from Central Position 20 Degrees on both sides
Skimming Speed 1.2 m/Sec
Lifting Speed 135 mm/Sec