JASH CAST IRON DIRECT MOUNTING & JASH CAST IRON PALLET MOUNTING
Tooling Blocks simultaneously provide multiple faces to hold components accurately in vertical plane for machining on Horizontal machining centers. Upon indexing of table a new face with new components is obtained for machining resulting into significant reduction of downtime by elimination of multiple sets ups. Pallet mounting tooling blocks also enable simultaneous loading and unloading of multiple fixture plates thereby reducing total set up time. Tooling blocks can also be used for vertical clamping of components on Horizontal Boring machines. Milling machines, Horizontal jig mills etc.

SALIENT FEATURES:
Made from plain close-grained gray cast iron conforming to Grade FG: 260 of IS: 210 and having hardness within 180 to 220 BHN.
Castings stress relieved to relieve internal stresses.
Hand scraped surface finish.
Offered in two grades of accuracies as under:
Grade 1: - Flatness, square ness and parallelity of vertical working faces within 15 microns over 300 mm. Equality of depth of vertical faces from sides within 40 microns.
Grade 2: - Flatness, square ness and parallelity of vertical working faces within 50 microns over 300 mm. Equality of depth of vertical faces from sides within 150 microns.
Square ness between two abutting sides of square base within 15 microns over 300 mm.
Square bottom base provided with counter bored holes for fixing on same size machine pallet.
Top vertical block is provided in two types of construction viz square block having four faces for job mounting and rectangular block having two faces for job mounting.
T-slots are of 18 mm size and have H8 tolerance.
Tapped holes are of 16 mm size. M16 Helical steel inserts can be provided, if required, at extra cost.