Alsbond is composed of 3 mm polyethylene (ldpe), between two layers of 0.30 mm
aluminium sheets in its standard form. We also manufacture panels from 2.5 mm to 6 mm
instead of 4 mm, for different fields of application, different locations of
application and different demands.
1. TECHNICAL SPECIFICATIONS


Aluminium Sheet : 0,3 mm thick aluminium on both surfaces
Core : Low density polyethylene in 3 mm thickness
Front Side : polyester coated aluminium sheet
Back Side : Polyester based service coated aluminium sheet



Thickness of Composite Panel : 2,0 mm - 6 mm
Thickness of Aluminium skin
Width of Composite Panel : 0,30 mm
1000 mm, 1250 mm,1500 mm
Maximum Production Length : 6000 mm
Standard Panel Dimensions : 4mm*1250 mm * 3200 mm
4mm*1500 mm * 3200 mm



Tensile Strength (Rm) : 186 MPa (min 130 MPa)
Yield Strength (Rp 0.2) : 148 MPa (min 90 MPa)
Elongation (A50%) : 6.8 (min 5)
Modulus of Elasticity : 70000 MPa



Thickness of Composite Panel : ± 0.2 mm
Width of Composite Panel : - 0 mm / + 2.0 mm
Length of Composite Panel : - 0 mm / + 4.0 mm
Diagonal Difference : max. 3.0 mm
Linearity (On Width and Length) : ± 0.2 mm



Panel Length : < 1500 mm max 5 mm
Panel Length : 1500 mm - 3000 mm max 7 mm
Panel Length : > 3000 m max 10 mm