Remote Control IR Repeater/ IR Extender with 1 Receiver & 4 Emitters ( for 4 AV
Devices ) & USB 5V adaptor U104-P

This unit U104-P can be used to extend the IR signal up to 4 Devices.
Remote Control IR Repeater/ IR Extender can be used with weak IR Remote
control signal from players such as IPTV. CD/VCD/DVD/ Blu-ray, Home System,
Television, Setup box, recorder, CATV, Karaoke system, etc. It is also
recommended for Players/ Equipments which are concealed in console or cabinet.


PACKAGES :

1. USB Adaptor 5V 500mA
Our U series which is powered by USB adaptor ( Included ) can also be powered
by connecting the USB cable to the USB port on your AV Equipment.

2. IR Emitter Cable ( 4 IR Emitter heads ) to DC3.5mm Male 1m
IR Emitter Cable is one which to be stuck the Emitters on the IR Point of your
respective AV equipments and DC3.5mm is to connect with Item 3.

3. USB to IR Receiver Length 2m. IR Receiver to DC3.5mm 2m
USB is to be connected to USB adaptor or your AV device for power.

INSTALLATION :

1. Clean the surface of your AV equipments. Stick the IR Emitter on each the IR
point of your AV Equipments. Connect the ends of two DC3.5mm cable.
2. Place the IR Receiver such a way that it is facing your remote control. It is
advisable to place away from Plasma or CCFL screen as it may affect the remote
control signal.
3. Connect the USB to USB Adaptor/ USB port of AV Equipment for power
4. Power up & all is ready to go.

TECHNICAL SPECIFICATION :

Receiving Frequency ( Broadband ) : 34KHz ~ 60KHz
Emitting Frequency ( Broadband ) : 38 KHz & 56KHz
Receiving Distance : 8 meter
Emitting Distance 10-20 cm
Power Consumption < 30mA
Dimension for Receiver & Emitter : 31 (L) ×17 (W) ×13 (H) mm, 13 (L) ×8 (W) ×5. 5
(H) mm
Input AC 100-240V/ Output DC 5V : USB 5V 500mA