Specifications

Up to 12-fiber ribbon splicing.
Cladding alignment with fixed v-grooves.
Environment resistant features.
Arc calibration-free

Introduction:
The FSM-80S is core-to-core alignment single fiber splicer succeeding to FSM-
60S. In addition to
ruggedized concept, which 60S created, the 80S has a series of new features,
such as "Automated
wind-protector and tube-heater" for quicker splicing cycle as well as fewer
operation steps,
"innovative carrying-case design" for
quicker preparation, "powerful Li-ion battey" for longer operation, high
resolution bigger LCD monitor,
and "built-in operation manuals" in various languages. Market is from
backbone network installation
to opto-electronics components production for quality splice.

pplicable
>>fibres SM (ITU-T G.652 & G.657), MM (ITU-T G.651),DS (ITU-T G.653),
>>NZDS (ITU-T G.655),Others
>>Fibre Count Single
Cladding diameter 80 to 150μm
Coating diameter 100 to 1000μm
>>Fibre cleaved length 5 to 16mm using Sheath Clamp A, B or 5 to13mm using
FH-60-250, FH-60-
900
>>Actual average splice
loss 0.02dB with SM, 0.01dB with MM, 0.04dB with DS, 0.04dB with NZDS.
>>Splice time 7sec:SM FAST mode, 12sec :SM AUTO mode, 15sec:AUTO mode
>>Return loss 60dB or greater
>>Splicing modes 100 splicer modes are available
>>Splice loss estimate Several types of core deformations as well as core axis
offset are taken into account for accurate loss estimate.
>> Attenuation splice function Intentional high splice loss of 0.1dB to 15dB
(0.01dB step) can be made for
an inline fixed attenuator