Prepainted Galvanized Steel Coil is made by the application of a paint, powder
or film coating in a continuous process prior to it being cut and shaped. It
provides a durable uniform surface finish, and is a superior alternative to
conventional post-manufacture painting of steel parts. The coil is coated on one
or both sides. Rolls apply a primer first, followed by a topcoat to the moving
steel strip. The substrate is usually cold reduced galvanized coil, but galvanized
HRC can also be used.
Typical size range:
0.18 – 1.5mm Thick
600 – 1500mm Wide
Paint coating:
25+5microns top side
5~7 microns bottom side
Zinc coating: 60 to 275g/sqm
Colour system: RAL
Available specifications:
EN 10326-2004
EN 10327-2004
JIS G3312-1994
ASTM A653-02a
Q/BQB 440-2003
Steel grades: DX51D+Z; CGCC; CGCD1; CS type A/B/C; FS Type A/B; TDC51D

Contact us: Skype ID: conway.sfc