MAXMA Micro Positive PS Plate is a general purpose positive-working conventional plate.

Features:

- Consistent quality, solid reliability and wide latitude
- Even electrochemical-grained substrate
- Faster vacuum by unique matte layer treatment
- High speed exposure and easy processing
- High fidelity dot reproduction
- Outstanding alkaline resistance and durability
- Superb ink-water balance

Plate type
*General purpose positive-working conventional plate with optional post-bake
for longer runs
*Applications: For both sheetfed and web offset presses
*Substrate: Electrochemical-grained and anodized aluminum substrate
*Thickness: 0.15, 0.20, 0.25, 0.30, and 0.40
*Shelf life: 24 months
Exposure
*Safelight: Handling under UV-free yellow safelight
*Spectral sensitivity: 360 - 420nm (peak at 390nm)
*Required imaging energy: 80mJ/cm2
*Resolution: 1 - 99% at 200lpi
*Recommended tonal step: 2 - 3 steps clean on UGRA 1982 Wedge
Processing
*Developer: MAXMA DP-6 (recommended) or popular alternatives
*Developer dilution: 1:3 - 1:8 (1:5 recommended)
*Replenishing rate: 60ml/m2
*Processing temperature: 23 - 27 degrees Celsius
*Processing dwell time: 40 - 20 seconds
*Plate baking: 220 degrees Celsius for 5 minutes
On-press
*Run length: 200,000 runs (unbaked) and above 1,000,000 runs (baked)
*Plate baking: 220 degrees Celsius for 5 minutes