A graphic HMI program that is easy-to-use and a reliable PLX system have been adopted.

Through the use of an HMI program that is suitable for 21CFR PART 11, only approved users can change control variables.

The highest-level of credibility and safety are guaranteed through the use of the PLC system.

Pollution is prevented during a blackout. This product can work normally after a blackout by using a program to compensate for a blackout.


•High performance design

•Vessel with water jacketed and insulation
(STS316L vessel + ST304 jacket)

•Automatic sterilization

•700 ~ 500,000 L total volume or more

•Top plate
-Inoculum port : Aseptic inoculation valve (option: Flaming)
-Pressure gauge and transmitter port
-Foam sensor port
-Exhaust port & condenser
-Agitation (top drive only)
-Light and spare ports
-Sight glass
-Manhole

•Upper side wall
-3 media port
-Gas overlay port and spare port

•Lower side wall
-Sampling port
-Temperature, pH, DO sensor port and spare port

•Bottom
-Harvest
-Agitation (bottom drive only)

•Agitation
-Double mechanical seal
-High torque AC geared motor
-4 baffles or more

•Aeration
-Ring sparger (option : 1 ~ 10㎛ micro sparger)
-0.2 ㎛ disposable hydrophobic filter with check valve

•Impeller
-Rushton type/Pitched blade/Marine blade

•Gas flow
-1-TMFC + bypass rotameter
-Flow rate : max 1 vvm or more
-2 or 3 TMFC (option)



•17” touch screen computer

•1 to 255 vessels intelligent control

•16 control loop per vessel

•Temperature control : PID control with water jacket heat exchanger(or heater) and circulation loop

•pH control : acid/base agent

•Agitation control : speed control

•DO control : PID cascade control with agitation, feeding and gas flow rate

•Antifoam control : antifoaming agent

•Feed control : fed-batch control by time, DO, pH

•Flow control : 1 ~ 4 mass flow control per vessel

•8