Introduction:
The Jabsco 53081-2003 is a bronze Flexible Impeller pump with a Nitrile Impeller,
Nitrile/Carbon/Ceramic Mechanical Seal, 1-1/2 Inch BSP threaded Ports, coupled to a
1450 RPM, 230 Volts, 50 HZ Motor. This Pump has an integral fluid reservoir to
protect
pump against dry running for up to 30 minutes. The motor is 4 Pole, single phase,
550
Watt, AC. Face and Foot mounting B3-B14. Enclosure IP55, Frame size 80 all IEC 72
standard. Fitted with manual reset thermal overload. Jabsco bronze bodied AC motor
pumps are self-priming, portable and versatile, making them ideal for a wide range of
applications wherever AC power is available.
Features :
Pump Body:Bronze
Impeller: Nitrile
Shaft Seal: Nitrile/Carbon/Ceramic Mechanical Seal
Port Size: Ports are 1-1/2 Inch BSP threaded
Product Specs :
Self primes from dry up to 9.8 feet
Flows up to 21 gal per minute
Pressure up to 29 psi
Handles hard or soft solids
Tolerates abrasive wear
Non pulsating flow
Handles viscosities up to 500 centiPoise
Uses Continuously Rated Motor
Dry running capability for 30 minutes without damage to pump
Others:
Connections: 1�� BSP internal threaded ports
Dimensions: 330mm long, 250mm wide, 240mm high
Output: up to 80 litres/minute
Built-in dry-running protection for up to 30 minutes after initial prime
Rapid self-priming from dry up to 3m
Will handle hard or soft solids
Corrosion resistant bronze body, stainless steel shaft
Carbon-ceramic mechanical shaft seal
Simple, fully serviceable design with few wearing parts
Continuously Rated Motor