"Pathfinder 10 is multipurpose drill rig for coring, drilling, blast hole drilling,
water well drilling and reverse circulation drilling. It can be built on different
frames such as regular skid frame, wheel and hydraulic crawler. It has hydraulic
regulated spindle to control speed of rotation between 220 rpm to 1500 rpm step less.
The rotation head can be swung aside for hole cleaning or grouting equipment.
Pathfinder 10 has automatic hydraulic synchronization system between chuck and rod
holder to handle the rods. It has hydraulic jacks at the top of the feeding frame for
stabilization.

Pathfinder 10 has also optional accessories such as hydraulic mud mixer, water flow
meter, hydraulic mud pump (140 lt/min), high torque, shock absorbent and second rod
holder.
"


DRILLING CAPACITY Diameter of Drill Rod BWL NWL HWL
PWL
Hole Diameter 60 mm 75,7 mm 96 mm 122,6 mm
Depth (m) 1350 1000 600 350

These depth values are theoretical values. Drilling depth may vary according to
groundconditions, equipment drilling angle, etc.


MAIN HOIST Line Pull 88 kN
20 lb * Free cylinder
Line Speed 25 m/min
83 ft/min * Free cylinder
Cable Size 59 m * 16 mm
199 ft * 10/16 in

WIRELINE Capacity 1000 m with 6
mm of rope
Line Pull Bare Drum 3,7 kN
832 lb
Full Drum 1 kN
225 lb
Line Speed Bare Drum 314 m/min
1030 ft/min
Full Drum 550 m/min
1085 ft/min

MAST AND FEED SYSTEM Feed Length 3,4 m
Feed Speed Fast and slow with variable control
Feeding and Pulling Force 63 kN - 160 kN
Drilling Angle 45 - 90 degrees
R