"Explorer60 is full hydraulic drill rig for coring and drilling for underground
galleries and surface. It can be built in different frames such as regular skid
frame, three wheel trailer and hydraulic crawlers narrow or wide. Explorer60 also can
be built in different feed lengths for different purposes. It has hydraulic regulated
spindle to control speed of rotation between 50 rpm to 1000 rpm step less. It can be
designed either with electrical engine or diesel engine. The rotation head can be
swung aside for hole cleaning or grouting equipment. Explorer60 has automatic
hydraulic synchronization system between chuck and rod holder to handle the rods. For
stabilization it has hydraulic jacks at the top of the feeding frame.

Explorer60 has also optional accessories such as larger wire line hoist, cathead or
two step hydraulic water pump.
"












TECHNICAL CHARACTERISTIC

DRILL ROD SIZE DRILLING DIAMETER DEPTH
AWL 48 mm 750 m
BWL 60 mm 500 m
NWL 75,8 mm 400 m
HWL 90 mm 150 m

The capacities may differ according to ground parameters, drilling angle and drilling
equipment. These values are only serving as a guideline in downward drilling in a
homogeneous rock.



FEED FRAME 1 2 3
Feed Length 850 mm 1800 mm 3300 mm
Feeding and Pulling Force 64 kN
Feed Speed Low: 0.5 m/s Fast: 1.0 m/s

ROTATION UNIT
Spindle Speed Range 50 - 1100 rpm
Maximum Torque 1366 Nm - 1987 Nm* *optional

ROD HOLDER
Maximum Rod Size 114 mm
Holding Force 22 kN 33 kN
(with TC inserts)

POWER UNIT
Electrical Diesel
Engine 45 - 55 kW 70 kW

MAIN PUMP
Flow 70 lt/min 70 lt/min
Pressure 260 bar 260 bar

SERVICE PUMP 1
Flow 35